|
|
 |
| |
|
|
| |
Comprehensive range available
We offer a comprehensive range for Structural Reinforcing,
the following are some of the products available. If
you have special requirements or need additional information
on any product not listed please contact
us.
|
|
| |
|
|
|
|
Masonry Reinforcement
Description
Lectros have developed a Masonry Reinforcement
System to rectify defects and improve
the strength of masonry through two distinct
applications.
|
|
Lintel Omission and
Beam Creation
The Lectros Masonry Reinforcement System
can be inserted into
the mortar bed joint above openings
where the brickwork has cracked or ‘dropped’
as a result of the failure or omission of
lintels.
Where ground subsidence has occurred underpinning
of the existing foundations is the usual
remedy. With the Lectros system, approved
contractors are able to create
reinforced masonry beams to span
between concrete pads - dramatically reducing
repair bills.
|
|
 |
|
Crack Repairs
Tying of cracks in the mortar bed joints
or cracks in and across panels of brickwork,
Whimpey ‘Nofines’ or Laings ‘Easiform’ style
concrete panelled walls.
|
|
 |
|
|
|
|
|
| |
|
|
|
|
Lateral Restraints
Description
Lateral restraints are manufactured from
304 Austenetic Stainless Steel rods 8mm
in diameter. These are supplied in standard
lengths of 1 metre but are available
in any length by prior arrangement.
The Lectros Lateral Restraint can
be fitted from outside the property with
a minimum of disturbance
- in most cases just a lifting of the floorboards
to determine the position of the joists.
|
|
|
|
|
|
|
 |
| |
|
|
|
|
Epoxy Resin &
Polyester Resin Systems
Description
Chemical anchors can be used in many applications
and have advantages over mechanical fixings.
The Lectros cartridge systems can be used
for the permanent fixing
of wall ties, starter and extension bars,
machines, underwater anchors/damp substrate,
rail and crane tracks etc.
|
|
The advantages of the Lectros cartridge
chemical anchorage are:
|
•
|
the optimum ratio of resin and activator
is dispensed by the cartridge
|
|
•
|
the patented nozzle ensures total
mixing
|
|
•
|
the cartridge system ensures that
personal contact with the resin is
minimised
|
|
•
|
very low wastage
|
|
•
|
it does not rely on expansion to
ensure a fixing and as a result can
be used both for fixings in weaker
substrates and with reduced edge distances
|
|
•
|
the nature of the resin used allows
a degree of vibration
resistance in situations with
dynamic loads
|
|
•
|
metallic fixings encased in resin
have a high degree
of corrosion protection
|
|
•
|
can be used with black, zinc plated,
galvanised or stainless steel bolts
|
|
•
|
provides extremely high
pull-out loads
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
Lectro Cem Grout
Description
Lectro Cem Grout is a premixed cementitious
thixotropic shrink compensated grout with
a specially developed blend of polymeric
reinforcing resins.
Lectro Cem Grout requires only the addition
of a measured amount of clean water to produce
an environmentally
and user friendly method of fixing:
• Anchors, Bolts
and Starter Bars;
• Masonry Reinforcing
and Stitching Bars;
• Remedial Wall
Ties.
Lectro Cem Grout is
non-gaseous,non-corrosive, non-oxidising
and is free of chlorides.
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
