|
|
 |
| |
|
|
| |
|
|
|
 |
 |
|
The Symptoms
Who hasn't experienced it at some point
- the mustiness of damp walls in old buildings
with no or insufficient insulation? And
when the plaster begins to fall off the
walls, salt blisters with paint flaking
appear on the facade and spots of mould
make rooms impossible to live in, this is
usually the end phase of a process which
has been going on for some years.
|
|
|
At this point it would be wrong to treat these
damaged areas "cosmetically" with only mortar
and paint, and have to put up with a very unhealthy
living climate with higher energy costs. This
stage of damage requires thorough corrective action
in order to prevent total dilapidation of these
sections of the house.
|
|
|
|
 |
|
How the system works
The system introduces a very small and perfectly
safe electric current into the wall just
above ground level through a series of titanium
anodes inserted into the brickwork. Its
effect is to repel the
rising moisture molecules down the walls
and harmlessly back into the ground. As
long as this tiny positive charge is maintained,
the protected walls remain dry and totally
free of damp.
|
|
 |
|
 |
|
Wall before protection
|
|
Wall after fitting the
Lectros System
|
|
|
| |
|
|
| |
 |
|
Normal operation showing conduction
through the anodes
|
|
|
Installation is neat and
quick. A series of small holes are drilled
in the outside masonry just above ground level,
and tiny anodes inserted, linked by a special
connecting wire which is 'pointed' into the wall.
The finished result is virtually
invisible and the disruption is minimal.
|
|
 |
| |
|
• Permanently guards
against the dangers of rising damp
• Protects property
of any age or structure
• Simple to install
with little disturbance to building structure
• Immediately effective
• Virtually indestructible
(self healing)
• Can be fitted with
monitoring system for added peace of mind
• 30 year Guarantee
|
|
 |
|
|
| |
|
|
| |
|
|
|
|
|
|
|
